Accelerated weathering - Suntest® XXL+

Xxl151Orsuntest Xxl Open W Smartphones
Search icon
Xxl151Orsuntest Xxl Open W Smartphones

The SUNTEST XXL+ is used to check for property changes of materials and products caused by sunlight, temperature and moisture in a short period of time. The aging which happens outdoors or indoors over months or years, such as fading, yellowing or loss of strength, can often be simulated within weeks inside a SUNTEST.

The Atlas SUNTEST XXL+ is a large xenon lamp weathering and lightfastness test chamber meeting various ISO, ASTM, and ICH industry standards. Its horizontal 3000 cm2 exposure area is best-in-class for 3D specimen testing.

Features

  • Dimensions 90 x 91 x 172 cm
  • Exposure area 79 x 39 cm (3000 cm2)
  • 3 air-cooled 1700 W xenon lamps
  • Easy-to-use touch screen user interface with 13 selectable languages
  • Direct setting and control of irradiance at 300-400 nm or 340 nm
  • Direct setting and control of Black Standard Temperature (BST) or Black Panel Temperature (BPT)
  • Direct setting and control of chamber temperature (CHT)
  • Direct setting of tolerance ranges for each test parameter for optimum test control
  • Display of diagnostic messages
  • 10 free programmable tests possible with up to 12 phases
  • Pre-programmed polymer and coatings standards for Quick-starters
  • Horizontal 3000 cm² exposure area for 34 standard or multiple 3-D specimens
  • Premium sunlight simulation according to CIE85 reference sun
  • Lamp cassette with aluminum reflector, lamp connections and filter slot
  • Outer filter with IR-reflective coating
  • Irradiance range 30-65 W/m2 (300-400 nm); 0.26-0.62 W/m2 (340 nm)
  • Measurement and control of CHT: max. 70 °C (during light phase)
  • Measurement and control of BST or BPT: max. 100 ºC (during light phase)
  • BST sensor design according to ISO 4892-1
  • Selectable temperature control either by CHT or by dual control: CHT and BST (BPT) simultaneously
  • Controlled temperature difference between CHT and BST (BPT)
  • Ultrasonic humidification system for humidity control
  • Specimen spray system with integrated 60 l water reservoir
  • 5° tilted specimen test plane for spray water draining
  • Access port ca. 30 x 25 mm to connect external sensors inside the test chamber
  • Switch-off by radiant exposure, light exposure time or total operating time
  • Advanced auto-start functions
  • Data output via memory card or RS 232
  • Internal memory chip for storing instrument data
  • Ethernet interface for network connections. See optional XenoTouch Software Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“)

Benefits

  • Premium simulation of solar radiation according to CIE85 reference sun
  • Optional filters for simulating sunlight through window glass, etc.
  • Best-in-class chamber design for testing 3-D specimens
  • Easy-to-use touch screen user interface with 13 selectable languages
  • Pre-programmed standards for Quick-start test setup
  • Access port for additional external sensors
  • Black Standard Temperature Sensor (BST) according to ISO 4892-1
  • Automatic control of irradiance for various testing needs

Accessories

  • Daylight filter
  • Window Glass filter
  • Solar ID 65 filter
  • BPT sensor
  • Specimen holders and masks
  • ICH-D10/20/30 powder sample holders for preparation of 1-3 mm powder samples (Pharmaceuticals)
  • Sliding sample table with exposure area of 740 x 368 mm
  • Air outlet hood for connecting the 3 outlets to a laboratory ventilation system
  • SunCal BB 300-400 BST sensor for calibration of irradiance in W/m² in the wavelength range 300-400 nm and for calibration of BST in °C
  • XenoTouch Software Add-ons “Remote Control“, “E-Mail Service“, “Online Monitoring“

More info? Quotation?